Axle Components

  Home > Axle Components > Hydraulic Disk/Drum Assemblies 2,000-7,000 lb >

Dexter 1,000 PSI Elec/Hydraulic Brake Actuator



 
Alternative Views:


Our Price: $630.00


Product Code: K71-650
Qty:

Description Additional information
 
Dexter Electric-Hydraulic Brake Axtuator for disk Brake application
1,000 psi maximum pressure output for axles equipped with drum brakes
Is be used with hydraulic drum brakes
Eliminates the feeling of being "pushed" by the trailer (reducing the potential of jackknife)
Eliminates the problems found when backing a trailer uphill with surge brakes
Eliminates brake drag common with surge brakes on a downhill grade
Is Compatible with most electronic brake controllers
Features
  • Dimensions: 11.38" long x 6" wide x 7" high
  • Uses DOT 3 or 4 brake fluid holds 40 cubic inches (0.7 quarts) of fluid
  • Meets all DOT regulations and complies with CFR-393 federal braking requirements, as opposed to surge brakes
  • Requires a four wire hookup and minimum 9 amp/hour break-away kit
  • Wiring connections: ◦Yellow: cold side of breakaway switch; the wire that goes hot when a break occurs
  • ◦Black: positive connection on breakaway switch; the wire that charges the breakaway battery
  • ◦Blue: output from in-cab controller; the wire that provides power from your brake controller
  • ◦White: ground
  • Works with Ford and Dodge factory brake controllers
  • Not compatible with Chevrolet factory brake controllers NOTE:which can be fixed if you use it in conjunction w/Titan EHB adapter #484600

Share your knowledge of this product. Be the first to write a review »